Outdoor Gazebo Bamboo Decking , 18mm Strand Woven Bamboo Decks

Bamboo decking is a carbonized, strand woven bamboo board, made from compressed of bamboo fibers, THJ bamboo have been heat treated process to ensure that the stablity and durability to comply with EU standard. Strand woven bamboo decking has unique design and the density is much higher than regular flooring, so that it has high hardness and it is not so easy to be bending or cupping. Bamboo can be contributing as an alternative to wood which provide a superb solution for paving outdoor areas, such as swimming pools, terraces, landscape areas, walkways etc. Generally speaking, bamboo as a plant is striking resistant to moisture, and if properly maintained, it can withstand adverse weather conditions such as the sun, snow, rain etc.

Features:

Common size: 1860mmx139mmx18/20/30/38mm

Surface: big wave / small ripple / small groove / flat

Color: coffee color, caramel color

Density: 1200kg/m3

Hardness: 106.8N/mm²

Formaldehyde Release: 0.001mg/m³

Moisture rate: 7-13%

Certificate: ISO/SGS/EPH/TUV

Features: anti-corrosive, eco-friendly, termites resistance/ fireproof/ anti-friction/ high hardness/ high stability/ high bending strength/ high density.

Application areas: garden, park, swimming pool, terraces, commercial buildings and any outdoor environment.

Installing of THJ outdoor bamboo decking

1. Decking with symmetrical grooved in two length sides can be fixed with clipDC 05-1. Distance between the decking is about 6-7mm after installation.

2. Decking with H&L grooved in two length sides can be fixed with clip DC 05-2.Distance between the deck is about 5mm after installation.

3. Decking with symmetrical or H&L grooved in two length sides can be fixed  with clip DC 07. Distance between the deck is about 4mm after installation.

Consideration: 

1. Before installing, please keep the products in dry and shade place, avoid the sunshine and the rain. Defects in surface caused by improper storage, is insufficient to cause customer complaint.

2. Before installation, clean up the worksite, make sure the basic is flat and stable, the drainage is smooth and comforms with the requirement of the construction  design.

3. The joists should be fixed on stable cement-blocks or cement-tiles.Ensure  decking slope 1-2 degrees from level inorder to shed water.

4. The distance between the joist must be between 450-500mm. By a deck of  1860 length need min.5 joists.

5. Distance from floor to the bottom of the decking should be 80-150mm.